Fieldpiece - The ATC2 K-type pipe clamp thermocouple is used to take temperatures of medium to large pipes or any other cylindrical surface within its 3/8" to 2 1/4" jaw range. Using a pipe clamp thermocouple greatly facilitates taking superheat or sub cooling measurements. Use the ATC2 for most A/C units. The ATC2 can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple.
Because the jaw is designed for HVAC/R, its clamping ability lets you measure temperatures of pipes that are fixed, at any angle, to walls or other surfaces. The sensor reaches correct temperature within a minute.
Calibration and atmosphere will affect maximum useful temperature in applications. The wire insulation and clamp material are designed to withstand a maximum continuous use at 180°F (82°C)
Plug: K-type thermocouple male mini plug
Typical stabilization time: less than 60 seconds
0.35 Pounds (lbs)
7 Inches (In)
2 Inches (In)
Country of Origin
12 Inches (In)
For Use With
The ATC2 can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple
Equipment Part List
*Valid through August 31, 2018. Excludes special pricing. Offer cannot be combined with other offers or programs. While supplies last. No rainchecks allowed. Management reserves the right to modify or end this promotion at anytime. Call your local branch for details.