Your browser is not supported. For the best experience, you should upgrade to a modern browser with improved speed and security.

Carrier® WeatherMaker™ - 10 Ton Packaged Rooftop Gas Heat & Electric Cool Unit Med Heat 2-Stage (460-3-60)

Item: 48TCED12A2A6-0A0G0
MFR: 48TCED12A2A6-0A0G0

Store Inventory

Sign in to see real-time inventory at the stores closest to you.
What’s the price?
Sign in for pricing.

Frequently Bought Together

Best Sellers

Refrigerant & Oils

Other

About This Product

Product Info

Description

Features and Benefits
  • Single cooling stage models are available from 3 - 10 ton.
  • Two cooling stage models are available from 7.5 - 15 ton.
  • SEER up to 13.0. EER’s up to 11.1. IEER’s up to 11.8 with single speed indoor fan motor and up to 12.8 with 2-speed/VFD indoor fan motor.
  • Up to 28% lighter than similar industry units. Lighter rooftops make easier replacement jobs.
  • Utility connections are the same because 3 - 12.5 ton units fit on existing Carrier rooftop curbs. This saves time and money on replacement jobs.
  • Standardized components and layout. Standardized components and controls make service and stocking parts easier.
  • Scroll compressors on all units. This makes service, stocking parts, replacement, and troubleshooting easier.
  • Field convertible airflow (3 - 15 ton). Being able to convert a unit from vertical airflow to horizontal makes it easy to overcome job site complications. 15 ton models require a simple supply duct cover to field convert from factory vertical to horizontal.
  • Easy-adjust, belt-drive motor available.
  • Provisions for bottom or side condensate drain.
  • Capable of thru-the-base or thru-the-curb gas line routing.
  • Single-point gas / electrical connection.
  • Sloped, composite drain pan sheds water; and won’t rust.
  • Standardized controls & control box layout. Standardized components & controls make stocking parts & service easier.
  • Tool-less filter access door.
  • Clean, large, easy to use control box.
  • Color-coded wiring.
  • Large, laminated wiring and power wiring drawings which are affixed to unit make troubleshooting easy.
  • Single, central terminal board for test and wiring connections.
  • Fast-access, handled, panels for easy access on normally accessed service panels.
  • “No-strip” screw system guides screws into the panel & captures them tightly without stripping the screw, the panel, or the unit.
  • Mechanical cooling (115°F to 40°F or 46°C to 4°C) standard on all models. Winter Start Kit allows cooling operation down to 25°F (-4°C) and MotorMaster to -20°F (-29°C).
  • High efficiency, gas heat with induced-draft flue exhaust design.
  • Induced draft motor ensures no flue gas can escape into the indoor air stream.
  • Carrier designed naturally draining heat exchanger, unlike positive pressure heat exchangers, do not need to be periodically, manually drained. This saves labor and maintenance expense.
  • 2-in (51mm) disposable filters on all units.
  • Refrigerant filter-drier on each circuit.
  • Each circuit is protected with a high and low pressure switch.
  • Many factory-installed options ranging from air management economizers, 2 position dampers, plus convenience outlets, disconnect switches and smoke detectors.
  • Standard (parts only) Warranty: 10 yr. aluminized heat exchanger, 5 yr. compressor, 3 yr. Novation condenser coil, 1 yr. parts.
  • Factory-installed Humidi-MiZer® adaptive dehumidification system on all sizes with round tube / plate fin condenser coils, includes MotorMaster I controller.
  • Optional Staged Air Volume (SAV) system utilizes a Variable Frequency Drive (VFD) to automatically adjust the indoor fan motor speed between cooling stages. Available on 2-stage cooling models 08 - 16 with electromechanical controls or RTU Open.
Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov

Specifications

Weight940 Pounds (lbs)
Width59.5 Inches (In)
Height49.375 Inches (In)
Country of OriginVar
Length88.125 Inches (In)
AFUE81%
Air FlowConvertible
Blower Motor HP1/4 HP
Blower Motor RPM838-1084
Blower Motor Speeds2
Blower Motor TypeFixed Torque
Blower Wheel15" x 15"
BrandCarrier
CertificationsAHRI Certified
Circuit Breaker - Max Amps30
ColorGray
CompressorScroll
Condenser Motor HP1/4 HP
Condenser Motor RPM1100
Condenser Motor TypeDirect Drive
Cooling Capacity114000
Cooling Rated Capacity Btu/h120000
Cycle/Hertz60 Hz
Drain Connection Size3/4"
Drive TypeBelt
EER11.1
Filter Size(4)20" x 20" x 2"
Heat Exchanger TypeAluminized Steel
Heating Capacity184000,147000
IEER11.8
Locked Rotor Amps52
Maximum Fuse Size30
Metering DeviceFixed Orifice
Minimum Circuit Amps24
Number of Fan Blades2
PhaseThree
Product Family48TC
Prop 65Yes
Rated Load Amps7.7
RefrigerantR-410a
Sound Level (dBA)82
StageTwo
Thermal Efficiency82%
TierWeatherMaker®
Tonnage10
Voltage460 VAC
Warranty OfferedYes
Watts325

Documents

Equipment Part List

Loading...